As with all of the other important components of your industrial machinery and equipment, it is important to inspect your valves periodically. Your valves do an important job of flow control, and if they aren't in their best condition, they will not be able to function properly. By inspecting your valves at the same time that you inspect the other critical parts of your equipment, you can catch potential problems and repair or replace your valves as needed. These are some of the things that you should check for during this inspection.
1. Grinding or Lapping
As valves get heavy use throughout the day, there is always the possibility of them grinding or lapping against other components of your machinery. This can happen if your valves are not properly adjusted or if other components need to be replaced. Grinding is a problem because it can result in the breakdown of your valves. Plus, as your valves break down, you have to worry about the materials that are breaking off contaminating your machinery, which can be a big problem, especially if your factory makes food products. Check for signs that your valves have been grinding, and consider readjusting them or replacing them if you notice that they have been.
Depending on the material that your valves are made from and whether or not they are exposed to moisture, they could begin to corrode over time. Rust and corrosion can pose a real problem because the corrosion can cause your valves to break down completely. Plus, the rust could contaminate your machinery and products. In the event that you notice even a little bit of rust, it's important to replace the valve. When doing so, look for a material that is less likely to corrode or that has been coated with a protective coating to help fight against rust.
The mechanical parts of your valves should be properly lubricated in order to function properly. If they aren't, they won't be able to move smoothly and easily. Each time that you inspect your valves, make a point to add a little bit of grease. Then, you can keep your valves operating as they should be and can make them last longer.
As you can see, there are multiple things that you should check for when inspecting industrial valves. By checking for these three things each time that you inspect your valves, you can help prevent potential problems with your equipment.
For more information, contact Van Valve Service Centre & Sales Ltd valve service or a similar company.